Beer Dispenser - Lindr Draught 80 Pints Per Hour Dispenser

Product Description

The Lindr Draught 80 is a self-contained beer dispenser that chills and serves draught lager without CO2 cylinders or remote coolers. The internal compressor takes lager from ambient to serve temperature in five to eight minutes. Two taps let you run two different drinks simultaneously — serve lager on one tap and cider, stout, or a second lager on the other — or double output on a single keg line during peak demand at busy bars.

Connect a keg, plug into a 13A socket, and you are ready to pour. This unit is part of the mobile bar equipment range. Unlike retail coolers, this commercial-grade machine is specified for hire trade demands — constant setup, transport across gravel and cobbles, and back-to-back weekend bookings. Clients including the BBC, ITV, HSBC, Cambridge University, and the Commonwealth Games have used Expo Hire equipment for their events.

What Is a Lindr Beer Dispenser?

Lindr is a Czech manufacturer specialising in draught beer cooling and dispensing equipment. Their machines are the market standard in UK event hire and pub trade settings because of their compact footprint, fast chill time, and reliability under high-volume continuous use.

The Lindr Draught 80 is the twin-tap model most commonly requested for event hire in the UK. It cools beer through a direct-draw inline chiller — beer passes over a cooling coil immediately before reaching the tap, so every pour is at the correct serve temperature regardless of how long the keg has been connected. This is different from a keg fridge system, which cools the entire keg slowly — with a Lindr machine, the first pint is as cold as the hundredth.

What Events Suit a Beer Dispenser Hire?

• Festivals and outdoor events: Self-contained — no venue bar infrastructure needed. Runs from any 13A socket or a suitable generator for off-grid sites.
• Corporate hospitality: Branded bar setups, product launches, and client entertainment. Pair with glassware hire and a mobile bar unit for a complete branded service point.
• Weddings and private parties: Serve draught lager at the reception. Consistent serve temperature throughout the evening without manual monitoring or ice top-ups.
• Exhibitions and trade shows: Draw foot traffic to your stand with fresh draught beer. Works alongside street food equipment for a full hospitality setup on your stand.
• Sporting events and hospitality suites: High-volume output suits busy bar intervals and post-match service.
• Pub gardens and temporary outdoor bars: When a pub's main bar cannot serve an outdoor area, a Lindr unit creates a fully functional secondary bar with no plumbing modification.

Lindr Draught 80 vs Standard Keg Fridges

A standard keg fridge requires the entire keg to chill down before serving — this can take 12 to 24 hours. The Lindr Draught 80 uses an inline chiller that cools beer at the point of pour, so you can connect a room-temperature keg and start pouring in under 10 minutes. For event hire where equipment arrives on the day, this is a critical practical advantage.

The Lindr also operates without a separate CO2 cylinder — the unit pressurises from an integrated system. One fewer piece of equipment to manage on-site and one fewer item that can run out mid-event.

Keg Compatibility and Sizing

The Lindr Draught 80 is compatible with all standard UK keg couplers including S-type (Heineken, Stella, Carling), G-type (Guinness, Kilkenny), and A-type (Foster's, Kronenbourg). Expo Hire can advise on coupler type for your chosen beer brand.

Keg sizing guidance for events: an 11-gallon keg (approximately 99 pints) suits a private party of 50 to 80 people for a 4-hour drinks reception. A full 11-gallon keg is a practical maximum for a single Lindr unit over one event — request two units for larger events or where you want to serve two different beers from separate kegs simultaneously.

Setup and Operation

Place the dispenser on a stable flat surface. Connect your keg coupler to the unit's inlet. Plug into a 13A mains socket or suitable generator. Allow five to eight minutes for the internal compressor to reach serve temperature. Adjust pour pressure using the integrated regulator. The built-in drip tray catches waste and slides out for emptying. The carry handles allow repositioning as your service point changes.

No CO2 cylinders are required. You supply the keg — Expo Hire can advise on keg sizing for your expected crowd and event duration. For first-time event bar operators, the Mobile Bar Hire Guide covers keg quantities, glass volumes, and bar layout planning in full.

Specifications

Output

Up to 80 pints per hour

Taps

2

Cooling Method

Internal inline compressor (no CO2 required)

Chill Time

5–8 minutes (ambient to serve temperature)

Dimensions

500mm x 220mm x 480mm

Weight

28kg

Material

Stainless Steel

Power

13A Standard Socket

Why Hire from Expo Hire?

• The only hire company in the UK that delivers and collects on Sundays — at no Sunday surcharge. Most competitors stop at Saturday.
• Live order tracking on every delivery and collection. Track your driver in real time by order number and postcode.
• Every order 100% confirmed before you pay. Live stock is checked at the point of booking. No substitutions, no shortfalls.
• No security deposit. No damage deposit. Ever.
• Free Minor Damage Waiver on every order. Accidental scratches and minor wear covered at no charge.

Stock levels update in real time. Select your dates to check availability and add the unit to your basket. Browse the full bar equipment hire range to complete your setup.

See the Mobile Bar Hire Guide for bar setup planning, equipment selection, and keg quantity guidance.